 |
|
|
|
THE NETHERLANDS
Hosokawa Micron BV
Gildenstraat 26
PO Box 98
7000 AB Doetinchem, NL |
| Phone: |
+31 (0)314 37 33 33 |
| Fax: |
+31 (0)314 37 34 56 |
| E-mail: |
info@hmbv.hosokawa.com |
| Chamber of Commerce no.: 34056583 |
|
|
|
|
 |
|
The products being mixed are subject to minimal mechanical and thermal stress. Therefore even fragile and heat sensitive products can be mixed with this mixer.
This mixer has the whole mass of product in movement and operates at tip speed between 1 and 5m/s which results in a very quick homogeneous product.
The Hosokawa Truncone mixer can be used for mixing of:
powders with powders
powders with liquids
The convective mixing effect is created by the following 3 factors:
The outer ribbon conveys the material upwards along the vessel wall.
The continuous movement of the rotor causes a continuous exchange of particles.
In the center of the mixing chamber, the product is forced to the bottom section by the inner ribbon.
Main features of the Truncone mixer
Mixing accuracy: Materials are mixed to the highest level of accuracy, even if some of the components are only present in minor quantities at a ratio of 1 to 100.000.
Mixer design: The Truncone mixer distinguishes itself from other technologies by its compact design and good accessibility of the mixing chamber for inspection and manual cleaning. Product lines are available especially for Pharma and food application in cantilevered execution up till 10.000 liter.
Flexibility in process: The Truncone mixer has a flexible working capacity from 20 - 100% of filling rate without loosing it’s mixing accuracy.
Gentle mixing: The mixing process is accomplished with medium energy input and without generation of heat therefore powders can be mixed without damaging the structure.
Fast and full discharge: In the bottom of the vessel an outlet is provided for product discharge. In the bottom section the central rotor is provided with a guiding bar. The bar guides the product to the outlet during discharge at low speed. This design guarantees a full discharge with a minimum of product remaining.
Cleaning: These Truncone mixers are easy cleanable either in a dry way using special extra large doors on the vessel or in a wet way using spraying devices.
Mixing time The overall product mass is in motion at few m/s which insure a very quick mixing. This can be important in industry like bulk food processes where high capacities are required.
|
|
