 |
|
|
|
THE NETHERLANDS
Hosokawa Micron BV
Gildenstraat 26
PO Box 98
7000 AB Doetinchem, NL |
| Phone: |
+31 (0)314 37 33 33 |
| Fax: |
+31 (0)314 37 34 56 |
| E-mail: |
info@hmbv.hosokawa.com |
| Chamber of Commerce no.: 34056583 |
|
|
|
|
 |
|
The Hosokawa Micron Denspack™ has demonstrated efficient densification of solids in various industries. It is a low cost method of improving material packing efficiency and reducing container volume where space is a concern.
Powder flows into the pocket of the Denspack by both gravity and vacuum. The rotor base is made of a sintered metal filter and divided into 6 separated pockets. The pockets in charging position between "7 and 1 o’clock" are put under vacuum. Product in these pockets will be de-aerated thoroughly; the entrapped air between the particles will be removed. The product in the pocket in discharge position will be released with a small amount of air or inert gas pulse. This pulse also prevents the metal filter from clogging. A stable de-aeration process is maintained continuously.
Capacity:
Depending on product characteristics, texture and particle size a wide variety of products can be de-aerated or densified. The Denspack™ is able to reach a capacity up to 25 m3/h.
Main features of the Hosokawa Denspack
Saving of storage and transportation costs up to 100% or more per container or big-bag
Increase of dry granulation efficiency when applied as pre-compactor
Very short return of investment
Low cost solution for numerous aerated powder problems
Space savings, due to the simple and compact construction
Improvement of powder characteristics to avoid the flashing phenomenon and to reduce dust emissions
Capability of dealing with very difficult materials with adhesive nature
Increase of filling efficiency, applied as prime feed in filling systems
Easy installation, operation and cleaning
|
|
