 |
|
|
|
THE NETHERLANDS
Hosokawa Micron BV
Gildenstraat 26
PO Box 98
7000 AB Doetinchem, NL |
| Phone: |
+31 (0)314 37 33 33 |
| Fax: |
+31 (0)314 37 34 56 |
| E-mail: |
info@hmbv.hosokawa.com |
| Chamber of Commerce no.: 34056583 |
|
|
|
|
 |
|
The agitator rotates with minimum wall clearance in a U-shaped vessel. The mixing rotor consists of an inner and outer ribbon which effects a counter flow mass movement with random motion in radial and axial directions.
The typical rotation speed is 30 to 150 Rpm depending on the product behaviour in order to insure a quick overall mixing of the entire batch. The Tip speed will be then between 0.5 and 2.5 m/s.
The Hosokawa Ribbon blender series HMA and RB can be used for mixing of:
powders with powders
powders with liquids
The mixing action in the double ribbon blender RB is created by the following 3 factors:
Conveying of product by one ribbon from left to right
Counter flow of product by the second ribbon
Exchange of product between the two ribbons
Main features of the HMA & RB ribbon mixers
Mixing accuracy: Materials are mixed to the highest level of accuracy, even if some of the components are only present in minor quantities. The Hosokawa ribbon blender is suitable to prepare homogeneous blends with minor components.
Mixer design: The Hosokawa Ribbon blender product line distinguishes itself by his compact and heavy duty design, making the ribbon blender suitable for the most challenging applications.
Fragile components: The mixing process is accomplished with a minimal energy input and without generation of heat and without damaging product structures.
Mixing efficiency: A homogene mixture can be achieved in a short period of time due to the rotor configuration. The Hosokawa HMA & RB mixers are able to mix batches in a size from 5 to 25.000 liters.
Fast and full discharge: The bottom outlet in combination with the small rotor wall clearances guarantees a fast and full discharge with a minimum of product remaining.
|
|
